Home / News
HDI PCB Advantages with Blind & Buried Via Technology
The author:  Pageviews:834  Release time:2017-05-19 01:46:04

Blind & Buried Via Technology

 (High Density Interconnect Printed Circuit Board)is created through Microvia and/or buried vias and sequential lamination with insulation materials and conductor wiring for higher density components. Once PCB spacing is limited, or you are operating with tight PTHs (plated through holes) constraints, Blind and Buried Vias is also the solution. Blind & Buried Via technology has vie a polar role in compressing a lot of capability into a smaller house space. By shortening vias to solely suffer necessary layers, a lot of extent area become obtainable for electronic components.

Key advantages include:

  • Ability to fulfill the density constraints of lines and pads on a typical style while not increasing the layer count or the pcb board size
  • The board aspect ratio reduction

Blind Via may be not a copper plated hole that connects just one outer layer to at least one or a lot of inner copper layers. A blind via never goes all the manner through a printed circuit board. In terms of circuit board design, blind vias are defined in a unique separate drilling file.


Additional advantage of Blind Vias: Ability to widen BGA(ball grid array) breakout channel (layer count reduction)


Buried Via is a copper plated-thru hole that connects 2 or more inner layers, with no contact with the outer layer. It's not possible to detect a buried via as it is "buried" because the outer layer surfaces of a PCB. Buried vias conjointly need a unique separate drill file as Buried Vias.


Additional Advantages of Buried Vias

  • No impact to any circuit line or surface mount part on the top or bottom layers of the board.
  • Circuit line (trace )or an SMD (surface mounting device) pad placement on the outer layers directly over the buried via.


has years of experience in manufacturing PCBs with Blind & Buried Vias. Both our engineers and production facility are equipped to handle the intricacy this technique requires, with very high accuracy. While this technique is more costly, we have seen savings through the reduction of layers or board size. This trend is becoming more and more popular within the PCB industry.


快乐飞艇是官彩还是私人彩票 快乐飞艇用哪个计划 澳洲快乐赛车pk拾计划 快乐赛车app哪个好玩 有快乐飞艇的彩票app 快乐飞艇定位胆技巧 快乐飞艇75秒赛车澳洲赛车 快乐飞艇app官网下载 三分钟快乐飞艇 彩票快乐飞艇玩法